Menu
Your Cart
Free Shipping fullfill by Amazon in the U.S.

H110 Series VFD 2HP 1.5KW 7A Single Phase 220V CNC Spindle Motor Variable Frequency Drive

H110 Series VFD 2HP 1.5KW 7A Single Phase 220V CNC Spindle Motor Variable Frequency Drive
H110 Series VFD 2HP 1.5KW 7A Single Phase 220V CNC Spindle Motor Variable Frequency Drive
H110 Series VFD 2HP 1.5KW 7A Single Phase 220V CNC Spindle Motor Variable Frequency Drive
H110 Series VFD 2HP 1.5KW 7A Single Phase 220V CNC Spindle Motor Variable Frequency Drive
H110 Series VFD 2HP 1.5KW 7A Single Phase 220V CNC Spindle Motor Variable Frequency Drive
H110 Series VFD 2HP 1.5KW 7A Single Phase 220V CNC Spindle Motor Variable Frequency Drive
H110 Series VFD 2HP 1.5KW 7A Single Phase 220V CNC Spindle Motor Variable Frequency Drive
H110 Series VFD 2HP 1.5KW 7A Single Phase 220V CNC Spindle Motor Variable Frequency Drive
H110 Series VFD 2HP 1.5KW 7A Single Phase 220V CNC Spindle Motor Variable Frequency Drive
H110 Series VFD 2HP 1.5KW 7A Single Phase 220V CNC Spindle Motor Variable Frequency Drive
H110 Series VFD 2HP 1.5KW 7A Single Phase 220V CNC Spindle Motor Variable Frequency Drive
H110 Series VFD 2HP 1.5KW 7A Single Phase 220V CNC Spindle Motor Variable Frequency Drive
H110 Series VFD 2HP 1.5KW 7A Single Phase 220V CNC Spindle Motor Variable Frequency Drive
$71.19
5 + $70.10
10 + $69.55
50 + $69.00
100 + $68.46
  • Model: H110S20015BX0
  • In Stock: 100
  • SKU: H110S20015BX0
  • In Stock Delivery Time: 24 Hours

Available Options

This VFD with power 2HP(1.5KW) and single phase 220V input voltage. This model is designed for the engraving machine industry, it has been optimized in software and hardware to make its performance better match the operating characteristics of the CNC spindle motor.


Key Specification

  • Rated Input Voltage: 1-Phase 220V
  • Allowed Input Voltage: 180~260VAC
  • Input Frequency: 50/60Hz(+/-5%)
  • Input Current: 14.0A
  • Power: 2HP(1.5KW)
  • Output Current: 7.0A
  • Output Voltage: 0~Rated Input Voltage
  • Output Frequency: 0~1000Hz
  • Output Capacity: 150% Rated Current 60s, 180% Rated Current 2s

Resources

Variable Frequency Drive Specification
Input Voltage 1PH 220VAC
Allowed Input Voltage 180 - 260VAC
Input Frequency 50 - 60Hz
Input Current 14A(1PH)
Power 2HP / 1.5Kw
Output Current 7A
Control Modes V/F, SVC
Output Voltage 0 - Rated Input Voltage
Output Frequency 0 - 1000Hz
Output Capacity 150% Rated Current 60s, 180% Rated Current 2s
Modulation Mode SVPWM
Start Torque 1Hz / 150%
Speed Range 1 : 100(SVC)
Acceleration/Deceleration Curve Line / S-curve
Frequency Accuracy Digital (Max. Frequency+/-0.01%) / Anolog (Max. Frequency+/-1%)
Motor Type Asynchronous Motor, Synchronour Motor, Single Phase Motor
Frequency Resolution Digital (0.1Hz) / Anolog (Max. Frequency+/-1%)
Rapid Current Limit Limit current rapidly within the current protection value, to ensure the safety of the equipment
Command Source Keypad, Terminal, Communication
None-stop When Instantaneous Power Off None-stop when instantaneous power off, automatic frequency drop
Set Value Source Digital, Analog, Multi-speed, Communication
PID Support main setting + PID
External Keypad Yes
LED Display Can display: Output frequency, Output voltage, Output current, Bus voltage, Display value 1, Display value 2, Error, Alarm
Protection Function Over-current protection, Over-voltage protection, Under-voltage protection, Overheating protection, Over-load protection, Phase lose protection, Earth leakage, etc
Altitude Derating use abouve 1000M, derating 10% per 1000M
Environment Temperature -10℃ ~+40℃ (environment temperature around 40℃~50℃, please derating use)
Humidity 5%~95%RH, No condensation
Vibration <5.9M/S (0.6g)
Store Environment Indoor, away from direct sunlight, no dust, no corrosive gas, no inflammable gas, no oil mist, no vapour, no drip and no salinity, etc
Store Temperature -40℃ ~ +70℃

Write a review

Note: HTML is not translated!
Bad Good
Captcha
This VFD with power 3HP(2.2KW) and single/three phase 220V input voltage. This model is designed for the engraving machine industry, it has been optim..
$97.47
This VFD with power 5HP(3.7KW) and single/three phase 220V input voltage. This model is designed for the engraving machine industry, it has been optim..
$131.16
This VFD with power 10HP(7.5KW) and three phase 220V input voltage. This model is designed for the engraving machine industry, it has been optimized i..
$258.91
This VFD with power 2HP(1.5KW) and three phase 380V input voltage. This model is designed for the engraving machine industry, it has been optimized in..
$80.31
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.