Nema 17 Stepper Motor Unipolar L=48mm w/ Gear Ratio 14:1 Planetary Gearbox

     0 reviews  |  Write a review
SKU: 17HS19-0406S-PG14
$27.34

Bulk quantity price break:

Qty 5 10 50 100
Price $26.66 $25.98 $25.29 $24.61
Save 2% 5% 7% 10%
Availability: 10000

Qty

askquestion

This unipolar Nema 17 stepper motor with 48mm body and 1.68A rated current, integrated a planetary gearbox of 13.73:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.

Electrical Specification

  • Manufacturer Part Number: 17HS19-0406S-PG14
  • Motor Type: Unipolar Stepper
  • Step Angle: 0.131 deg
  • Holding Torque without Gearbox: 32Ncm(45.32oz.in)
  • Rated Current/phase: 0.4A
  • Phase Resistance: 30 ohms
  • Voltage: 12V
  • Inductance: 25 mH ± 20%(1KHz)

Gearbox Specifications

  • Gearbox Type: Planetary
  • Gear Ratio: 13.73: 1
  • Efficiency: 81%
  • Backlash at No-load: <=1 deg
  • Max.Permissible Torque: 3Nm(425oz.in)
  • Moment Permissible Torque: 5Nm(708oz.in)
  • Shaft Maximum Axial Load: 50N
  • Shaft Maximum Radial Load: 100N

Physical Specifications

  • Frame Size: 42 x 42mm
  • Motor Length: 48mm
  • Gearbox Length: 35mm
  • Shaft Diameter: Φ8mm
  • Shaft Length: 20mm
  • D-cut Length: 15mm
  • Number of Leads: 6
  • Lead Length: 500mm
  • Weight: 560g

Connection

A+
O+
A-
B+
O-
B-
BLK
YEL
GRN
RED
WHT
BLU

Resources

Gearbox Specification
Backlash at No-load(Max.°) 1
Efficiency 81%
Gear Ratio 13.73:1
Gearbox Length(mm) 35
Gearbox Type Planetary
Max. Permissible Torque(Ncm) 300
Max. Permissible Torque(oz.in) 424.8
Moment Permissible Torque(Ncm) 500
Moment Permissible Torque(oz.in) 708.1
Shaft Maximum Axial Load(N) 50
Shaft Maximum Radial Load(N) 100
Motor Specification
Inductance(mH) 25
Lead Length(mm) 500
Motor Nema Size Nema 17
No. of Lead 6
Phase Resistance(ohm) 30
Rated Current(A) 0.4
Shaft Diameter(mm) 8
Shaft Length(mm) 20
Bipolar/Unipolar Unipolar
Holding Torque w/o Gearbox(Ncm) 32
Holding Torque w/o Gearbox(oz.in) 45.3
Motor Length(mm) 48
Single Shaft/Dual Shaft Single Shaft
Shaft Type D-Cut
Physical Specification
Weight(g) 550

Write a review

Note: HTML is not translated!
Captcha

Do you have any questions about Nema 17 Stepper Motor Unipolar L=48mm w/ Gear Ratio 14:1 Planetary Gearbox?

Captcha