Digital Stepper Driver RMS Current Max 8.2A 80-240VAC

     1 reviews  |  Write a review
SKU: DM2282S

Bulk quantity price break:

Qty 5 10 50 100
Price $81.31 $78.51 $78.51 $78.51
Save 3% 7% 7% 7%
Availability: 100



The DM2282S is a two phase digital stepper driver based on DSP. Its Microstep resolutions and output current are programmable. And it has advanced control algorithm which brings a unique level of system smoothness, provides optimum torque and mid-range instability. The control algorithm of Multi-Stepping can drvie stepper motor to run smoothly. The control algorithm of torque compensation can improve the torque of motor in the high speed. The control algorithm of motor self-test and parameter auto-setup technology offers optimum responses with different motors and easy-to-use. The control algorithm of smoothness can enhance the acceleration and deceleration of motor. Its unique features make the DM2282S to be an ideal solution for applications.

Key Features:

  • Parameter auto-setup and motor self-test
  • Multi-Stepping inside, Small noise, low heat, smooth movement
  • Torque compensation at high speed
  • Variable current control technology, High current efficiency
  • Accelerate and decelerate control inside, Great improvement in smoothness of starting or stopping the motor
  • Support PUL/DIR and CW/CCW modes
  • Storage the position of motor
  • Optically isolated input and compatible with 5V or 24V
  • User-defined microsteps
  • Micro-step resolutions and Output current programmable
  • Over current, over voltage and low voltage protection
  • Automatic detection, flexible selection of pulse edge count mode
  • Green light means running while red light means protection or off line

Technological Index:

  • Input Voltage: 80~240VAC
  • Output Current: 8A
  • Max Pulse Frequency: 200K
  • Default Communication Rate: 57.6kbps
  • Over current peak value: 15A±10%
  • Over voltage value: 350V
  • The over position error range can be set through the HISU
  • Overall Dimensions(mm): 192x127x85
  • Weight: Approximate 1500g
  • Environment: Avoid dust,oil fog and corrosive gases
  • Operating Temperature: +70℃Max
  • Storage Temperature: -20℃~+80℃
  • Humidity: 40~90%RH
  • Cooling method: Natural cooling or forced air cooling


Stepper Driver Specification
Input Voltage(V) AC80 - 240
Output Current(A) 2.2 - 8.2
Microstep(Steps/rev.) 400 - 25600
Max. Pulse Input(kHZ) 200
Pulse Width(μs) 2.5
Physical Specification
Weight(g) 1500

Write a review

Note: HTML is not translated!

Do you have any questions about Digital Stepper Driver RMS Current Max 8.2A 80-240VAC?