- Your shopping cart is empty!
WELCOME TO STEPPERONLINE
Dual Shaft Nema 42 CNC Stepper Motor 30Nm (4248oz.in) 8A 110x201mm 4 Wires
Dual Shaft Nema 42 CNC Stepper Motor 30Nm (4248oz.in) 8A 110x201mm 4 Wires
Dual Shaft Nema 42 CNC Stepper Motor 30Nm (4248oz.in) 8A 110x201mm 4 Wires 5 1
SKU: 42HS79-8004D
$207.00
Bulk quantity price break:
Qty | 5 | 10 | 50 | 100 |
---|---|---|---|---|
Price | $196.65 | $186.30 | $175.95 | $165.60 |
Save | 5% | 10% | 15% | 20% |
Availability: 100
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
askquestion
This is the biggest cnc stepper motor we have, it with size 110x110x201mm. It has 4 wires, each phase draws 8A, allowing for a huge torque up to 30Nm (4248oz.in). A rear shaft can mount encoder, hand wheel or equals.
Electrical Specification
- Manufacturer Part Number: 42HS79-8004D
- Step Angle: 1.8 deg
- Holding Torque: 30Nm(4248oz.in)
- Rated Current/phase: 8.0A
- Voltage: 5.36V
- Phase Resistance: 0.67ohms
- Inductance: 11mH ± 20%(1KHz)
Physical Specification
- Frame Size: 110 x 110mm
- Body Length: 201mm
- Shaft Diameter: Φ19mm
- Shaft Length: 55.37mm
- Key Way Length: 35mm
- Number of Leads: 4
- Lead Length: 310mm
- Weight: 12.5kg
Connection
A+ | A- | B+ | B- |
Red | Green | Yellow | Blue |
Resources
- Full Datasheet: 42HS79-8004D.pdf
Electrical Specification | |
Bipolar/Unipolar | Bipolar |
Holding Torque(Ncm) | 3000 |
Holding Torque(oz.in) | 4248 |
Inductance(mH) | 11 |
Phase Resistance(ohm) | 0.67 |
Rated Current(A) | 8 |
Step Angle(°) | 1.8 |
Physical Specification | |
Body Length(mm) | 201 |
Frame Size(mm) | 110 x 110 |
Single Shaft/Dual Shaft | Dual Shaft |
Shaft Type | KeyWay |
Shaft Diameter(mm) | 19 |
Shaft Length(mm) | 55.37 |
No. of Lead | 4 |
Lead Length(mm) | 300 |
Weight(g) | 12000 |