Dual Shaft Nema 34 Unipolar 1.8deg 2.2Nm (312oz.in) 2A 86x86x66mm 6 Wires

     1 reviews  |  Write a review
SKU: 34HS26-2006D
$38.29

Bulk quantity price break:

Qty 5 10 50 100
Price $34.96 $33.29 $31.63 $29.96
Save 9% 13% 17% 22%
Availability: 100

Qty

  • Connectors: Molex, Harwin, Tyco/AMP, JST etc.
  • Lead wires & cables: Special lengths, Protective hose
  • Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
  • Winding: Resistance, Inductance, Rated Current, etc.
askquestion

This unipolar Nema 34 stepper motor with step angle 1.8deg and size 86x86x66mm. It has 6 wires, each phase draws 2.0A, with holding torque 2.2Ncm (312oz.in). A rear shaft can mount encoder, hand wheel or equals.

Electrical Specification

  • Manufacturer Part Number: 34HS26-2006D
  • Motor Type: Unipolar Stepper
  • Step Angle: 1.8 deg
  • Holding Torque: 2.2Nm(312oz.in)
  • Rated Current/phase: 2.0A
  • Voltage: 4.4V
  • Phase Resistance: 2.2ohms
  • Inductance: 7.0mH ± 20%(1KHz)

Physical Specification

  • Frame Size: 86 x 86mm
  • Body Length: 66mm
  • Shaft Diameter: Φ14mm
  • Front Shaft Length: 37mm
  • D-cut Length: 25mm
  • Rear Shaft Length: 34mm
  • Number of Leads: 6
  • Lead Length: 300mm
  • Weight: 1.7kg

Connection

A+
O+
A-
B+
O-
B-
BLK
YEL
GRN
RED
WHT
BLU

Resources

Electrical Specification
Bipolar/Unipolar Unipolar
Holding Torque(Ncm) 220
Holding Torque(oz.in) 312
Inductance(mH) 7
Phase Resistance(ohm) 2.2
Rated Current(A) 2
Step Angle(°) 1.8
Physical Specification
Body Length(mm) 66
Frame Size(mm) 86x86
Single Shaft/Dual Shaft Dual Shaft
Shaft Type D-Cut
Shaft Diameter(mm) 14
Shaft Length(mm) 37
No. of Lead 6
Lead Length(mm) 300
Weight(g) 1700

Write a review

Note: HTML is not translated!
Captcha

Do you have any questions about Dual Shaft Nema 34 Unipolar 1.8deg 2.2Nm (312oz.in) 2A 86x86x66mm 6 Wires?

Captcha