Dual Shaft Nema 23 Bipolar 3Nm (425oz.in) 4.2A 57x57x114mm 4 Wires
Dual Shaft Nema 23 Bipolar 3Nm (425oz.in) 4.2A 57x57x114mm 4 Wires
$47.32
5 + $39.75
10 + $37.85
50 + $35.96
100 + $34.07
- Model: 23HS45-4204D
- Stock Status: 100
Available Options
This is a dual-shaft motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.
Electrical Specification
- Manufacturer Part Number: 23HS45-4204D
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 2.8Nm(425oz.in)
- Rated Current/phase: 4.2A
- Phase Resistance: 0.9ohms
- Inductance: 3.8mH ± 20%(1KHz)
Physical Specification
- Frame Size: 57 x 57mm
- Body Length: 113mm
- Shaft Diameter: Φ8mm
- Shaft Length: 21mm
- D-Cut Length: 15mm
- Rear Shaft Length: 13.5mm
- Rear Shaft Diameter: Φ8mm
- Number of Leads: 4
- Lead Length: 500mm
Connection
A+ | A- | B+ | B- |
Red | Green | Yellow | Blue |
Resources
- Motor Datasheet: 23HS45-4204D.pdf
| Electrical Specification | |
| Inductance(mH) | 3.8 |
| Phase Resistance(ohm) | 0.9 |
| Rated Current(A) | 4.2 |
| Step Angle(deg.) | 1.8 |
| Bipolar/Unipolar | Bipolar |
| Holding Torque(Ncm) | 280 |
| Holding Torque(oz.in) | 396.5 |
| Physical Specification | |
| IP Rating | 40 |
| Frame Size(mm) | Nema 23 (57 x 57) |
| Body Length(mm) | 113 |
| Single Shaft/Dual Shaft | Dual Shaft |
| Output Shaft Type | D-Cut |
| Shaft Diameter(mm) | 8 |
| Shaft Length(mm) | 21 |
| No. of Lead | 4 |
| Lead Length(mm) | 500 |
| Weight(g) | 1750 |
Tags: 23HS45-4204D, Nema 23 - 57 x 57mm, Output Shaft Type: D-Cut, Shaft Diameter(mm): 8, Shaft Length(mm): 21, No. of Lead: 4, Lead Length(mm): 500, Weight(g): 1750, Single Shaft/Dual Shaft: Dual Shaft, Holding Torque(Ncm): 280, Rated Current(A): 4.2, Holding Torque(oz.in): 396.5, Bipolar/Unipolar: Bipolar, Step Angle(deg.): 1.8, Phase Resistance(ohm): 0.9, Inductance(mH): 3.8, Body Length(mm): 113, Frame Size(mm): Nema 23 (57 x 57), IP Rating: 40
