Menu
Your Cart

Dual Shaft Nema 23 Bipolar 1.8deg 2.5Nm (354oz.in) 3A 57x57x114mm 8 Wires

Dual Shaft Nema 23 Bipolar 1.8deg 2.5Nm (354oz.in) 3A 57x57x114mm 8 Wires
Dual Shaft Nema 23 Bipolar 1.8deg 2.5Nm (354oz.in) 3A 57x57x114mm 8 Wires
Dual Shaft Nema 23 Bipolar 1.8deg 2.5Nm (354oz.in) 3A 57x57x114mm 8 Wires
Dual Shaft Nema 23 Bipolar 1.8deg 2.5Nm (354oz.in) 3A 57x57x114mm 8 Wires
Dual Shaft Nema 23 Bipolar 1.8deg 2.5Nm (354oz.in) 3A 57x57x114mm 8 Wires
Dual Shaft Nema 23 Bipolar 1.8deg 2.5Nm (354oz.in) 3A 57x57x114mm 8 Wires
Dual Shaft Nema 23 Bipolar 1.8deg 2.5Nm (354oz.in) 3A 57x57x114mm 8 Wires
Dual Shaft Nema 23 Bipolar 1.8deg 2.5Nm (354oz.in) 3A 57x57x114mm 8 Wires
Dual Shaft Nema 23 Bipolar 1.8deg 2.5Nm (354oz.in) 3A 57x57x114mm 8 Wires
Dual Shaft Nema 23 Bipolar 1.8deg 2.5Nm (354oz.in) 3A 57x57x114mm 8 Wires
Dual Shaft Nema 23 Bipolar 1.8deg 2.5Nm (354oz.in) 3A 57x57x114mm 8 Wires
$35.61
5 + $32.52
10 + $30.97
50 + $29.42
100 + $27.87
  • Model: 23HS45-3008D
  • Stock Status: 100
  • SKU: 23HS45-3008D

Available Options

This nema 23 stepper motor with step angle 1.8deg and size 57x57x114mm. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Parallel), you can choose any type as you wish. It's houlding torque reach 1.7Nm(240.7oz.in) with unipolar connection and 2.5Nm(354oz.in) with bipolar connection. A rear shaft can mount encoder, hand wheel or equals.


Electrical Specification

  • Manufacturer Part Number: 23HS45-3008D
  • Motor Type: Unipolar/Bipolar Stepper
  • Step Angle: 1.8 deg
  • Holding Torque(Unipolar): 1.7Nm(240.7oz.in)
  • Holding Torque(Bipolar Serial): 2.5Nm(354oz.in)
  • Holding Torque(Bipolar Parallel): 2.5Nm(354oz.in)
  • Rated Current/phase(Unipolar): 3.0A
  • Rated Current/phase(Bipolar Serial): 2.12A
  • Rated Current/phase(Bipolar Parallel): 4.24A
  • Phase Resistance(Unipolar): 0.8 ohms
  • Phase Resistance(Bipolar Serial): 1.6 ohms
  • Phase Resistance(Bipolar Parallel): 0.4 ohms
  • Inductance(Unipolar): 1.7mH ± 20%(1KHz)
  • Inductance(Bipolar Serial): 6.8mH ± 20%(1KHz)
  • Inductance(Bipolar Parallel): 1.7mH ± 20%(1KHz)

Physical Specification

  • Frame Size: 57 x 57mm
  • Body Length: 114mm
  • Front Shaft Diameter: Φ8mm
  • Rear Shaft Diameter: Φ6.35mm
  • Front Shaft Length: 21mm
  • D-cut length: 15mm
  • Rear Shaft Length: 15mm
  • Number of Leads: 8
  • Lead Length: 500mm
  • Weight: 1.7kg

Connection

A+
A-
C+
C-
B+
B-
D+
D-
RED
YEL
BLK
BLU
WHT
PUR
GRN
BRN

Resources

Electrical Specification
Inductance(mH) 1.7
Phase Resistance(ohm) 0.4
Rated Current(A) 4.24
Step Angle(deg.) 1.8
Bipolar/Unipolar Bipolar / Unipolar
Holding Torque(Ncm) 250
Holding Torque(oz.in) 354
Physical Specification
IP Rating 40
Frame Size(mm) Nema 23 (57 x 57)
Body Length(mm) 114
Single Shaft/Dual Shaft Dual Shaft
Output Shaft Type D-Cut
Shaft Diameter(mm) 8
Shaft Length(mm) 21
No. of Lead 8
Lead Length(mm) 500
Weight(g) 1600
  • Motor Shaft
  • Cable
  • Connector
  • Encoder
  • Brake
  • Gearbox


File Size
23HS45-3008D_Full_Datasheet.pdf 149.48KB Download
23HS45-3008D.STEP 1.98MB Download
23HS45-3008D_Torque_Curve.pdf 161.42KB Download

Write a review

Note: HTML is not translated!
Bad Good
This Nema 23 stepper motor with step angle 1.8deg and size 57x57x56mm. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial..
$17.99
This unipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x76mm. It has 6 wires, each phase draws 3.0A, with holding torque 1.35Nm (191..
$25.49
This nema 23 stepper motor with step angle 1.8deg and size 57x57x84mm. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial..
$30.78
This nema 23 stepper motor with step angle 1.8deg and size 57x57x84mm. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial..
$32.43
This is a dual-shaft motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be..
$47.32
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.