- Your shopping cart is empty!
WELCOME TO STEPPERONLINE
Double Shaft Nema 23 Bipolar 0.9deg 0.9Nm (127.5oz.in) 0.38A 57x57x51mm 4 Wires
Double Shaft Nema 23 Bipolar 0.9deg 0.9Nm (127.5oz.in) 0.38A 57x57x51mm 4 Wires
Double Shaft Nema 23 Bipolar 0.9deg 0.9Nm (127.5oz.in) 0.38A 57x57x51mm 4 Wires
5
1
SKU: 23HM20-0384D
$15.97
Bulk quantity price break:
| Qty | 3 | 10 | 30 | 100 |
|---|---|---|---|---|
| Price | $15.25 | $14.52 | $13.80 | $13.07 |
| Save | 5% | 9% | 14% | 18% |
Availability: 100
askquestion
This is a dual-shaft and low-speed motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.
Electrical Specification
- Manufacturer Part Number: 23HM20-0384D
- Motor Type: Bipolar Stepper
- Step Angle: 0.9 deg
- Holding Torque: 0.9Nm(127.5oz.in)
- Rated Current/phase: 0.38A
- Voltage: 12.1V
- Phase Resistance: 32ohms
- Maximum Speed: 90RPM
- Inductance: 110mH ± 20%(1KHz)
Physical Specification
- Frame Size: 57 x 57mm
- Body Length: 52mm
- Shaft Diameter: Φ8mm
- Shaft Length: 21mm
- D-Cut Length: 15mm
- Rear Shaft Length: 13.5mm
- Rear Shaft Diameter: Φ8mm
- Number of Leads: 4
- Lead Length: 500mm
Connection
A+ |
A- |
B+ |
B- |
Red |
Green |
Yellow |
Blue |
Resources
- Motor Datasheet: 23HM20-0384D.pdf
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Holding Torque(Ncm) | 90 |
| Holding Torque(oz.in) | 127.5 |
| Inductance(mH) | 110 |
| Phase Resistance(ohm) | 32 |
| Rated Current(A) | 0.38 |
| Step Angle(°) | 0.9 |
| Physical Specification | |
| Body Length(mm) | 52 |
| Frame Size(mm) | 57x57 |
| Single Shaft/Dual Shaft | Dual Shaft |
| Shaft Type | D-Cut |
| Shaft Diameter(mm) | 8 |
| Shaft Length(mm) | 21 |
| No. of Lead | 4 |
| Lead Length(mm) | 500 |
| Weight(g) | 750 |
