Menu
Your Cart

Dual Shaft Nema 17 Bipolar 45Ncm (63.7oz.in) 2A 2.2V 42x42x40mm 4 Wires

Dual Shaft Nema 17 Bipolar 45Ncm (63.7oz.in) 2A 2.2V 42x42x40mm 4 Wires
Dual Shaft Nema 17 Bipolar 45Ncm (63.7oz.in) 2A 2.2V 42x42x40mm 4 Wires
Dual Shaft Nema 17 Bipolar 45Ncm (63.7oz.in) 2A 2.2V 42x42x40mm 4 Wires
Dual Shaft Nema 17 Bipolar 45Ncm (63.7oz.in) 2A 2.2V 42x42x40mm 4 Wires
Dual Shaft Nema 17 Bipolar 45Ncm (63.7oz.in) 2A 2.2V 42x42x40mm 4 Wires
Dual Shaft Nema 17 Bipolar 45Ncm (63.7oz.in) 2A 2.2V 42x42x40mm 4 Wires
Dual Shaft Nema 17 Bipolar 45Ncm (63.7oz.in) 2A 2.2V 42x42x40mm 4 Wires
Dual Shaft Nema 17 Bipolar 45Ncm (63.7oz.in) 2A 2.2V 42x42x40mm 4 Wires
Dual Shaft Nema 17 Bipolar 45Ncm (63.7oz.in) 2A 2.2V 42x42x40mm 4 Wires
Dual Shaft Nema 17 Bipolar 45Ncm (63.7oz.in) 2A 2.2V 42x42x40mm 4 Wires
Dual Shaft Nema 17 Bipolar 45Ncm (63.7oz.in) 2A 2.2V 42x42x40mm 4 Wires
$8.30
3 + $7.88
10 + $7.47
30 + $7.05
100 + $6.64
  • Model: 17HS16-2004D-C1
  • In Stocktest: 234
  • SKU: 17HS16-2004D-C1
This product has a minimum quantity of 50

This dual shaft nema 17 stepper motors with step angle 1.8deg and size 42x42x40mm. It has 4 wires, each phase draws 2A at 2.2V, with holding torque 45Ncm (63.7oz.in). A rear shaft is available.

Electrical Specification

  • Manufacturer Part Number: 17HS16-2004D-C1
  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8 deg
  • Holding Torque: 45Ncm(63.7oz.in)
  • Rated Current/phase: 2A
  • Voltage: 2.2V
  • Phase Resistance: 1.1ohms
  • Inductance : 2.6mH ± 20%(1KHz)

Physical Specification

  • Frame Size: 42 x 42mm
  • Body Length: 40mm
  • Shaft Diameter: Φ5mm
  • Shaft Length: 20mm
  • Number of Leads: 4
  • Lead Length: 640mm
  • Weight: 300g

Connection

A+
A-
B+
B-
Black
Green
Red
Blue

Resources

Electrical Specification
Inductance(mH) 2.6
Phase Resistance(ohm) 1.1
Rated Current(A) 2
Step Angle(deg.) 1.8
Bipolar/Unipolar Bipolar
Holding Torque(Ncm) 45
Holding Torque(oz.in) 63.7
Physical Specification
IP Rating 40
Frame Size(mm) Nema 17 (42 x 42)
Body Length(mm) 40
Single Shaft/Dual Shaft Single Shaft
Output Shaft Type O
Shaft Diameter(mm) 5
Shaft Length(mm) 20
No. of Lead 4
Lead Length(mm) 640
Weight(g) 300

Write a review

Note: HTML is not translated!
Bad Good
This is a dual-shaft and low-speed motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. Threaded holes are available on the rear end ca..
$19.97
This nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 4 wires, each phase draws 1.68A at 2.8V, with holding torque 45Ncm (63.7..
$9.48
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x33mm. It has 4 wires, each phase draws current 0.67A, with holding torque 22...
$7.71
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x40mm. It has 4 wires, each phase draws very lower current 0.28A, with holding..
$8.30
This bipolar Nema 34 stepper motor with step angle 1.8deg and size 86x86x76mm. It has 4 wires, each phase draws 4.00A, with holding torque 3.6N.m (509..
$35.04
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.