Dual Shaft Nema 23 Bipolar 3Nm (425oz.in) 4.2A 57x57x114mm 4 Wires

     0 reviews  |  Write a review
SKU: 23HS45-4204D
$37.73

Bulk quantity price break:

Qty 5 10 50 100
Price $31.69 $30.18 $28.68 $27.17
Save 16% 20% 24% 28%
Availability: 100

Qty

  • Connectors: Molex, Harwin, Tyco/AMP, JST etc.
  • Lead wires & cables: Special lengths, Protective hose
  • Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
  • Winding: Resistance, Inductance, Rated Current, etc.
askquestion

This is a dual-shaft motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.

Electrical Specification

  • Manufacturer Part Number: 23HS45-4204D
  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8 deg
  • Holding Torque: 2.8Nm(425oz.in)
  • Rated Current/phase: 4.2A
  • Voltage: 3.78V
  • Phase Resistance: 0.9ohms
  • Inductance: 3.8mH ± 20%(1KHz)

Physical Specification

  • Frame Size: 57 x 57mm
  • Body Length: 113mm
  • Shaft Diameter: Φ8mm
  • Shaft Length: 21mm
  • D-Cut Length: 15mm
  • Rear Shaft Length: 13.5mm
  • Rear Shaft Diameter: Φ8mm
  • Number of Leads: 4
  • Lead Length: 500mm

Connection

A+
A-
B+
B-
Red
Green
Yellow
Blue

Resources

Electrical Specification
Bipolar/Unipolar Bipolar
Holding Torque(Ncm) 280
Holding Torque(oz.in) 396.5
Inductance(mH) 3.8
Phase Resistance(ohm) 0.9
Rated Current(A) 4.2
Step Angle(°) 1.8
Physical Specification
Body Length(mm) 113
Frame Size(mm) 57x57
Single Shaft/Dual Shaft Dual Shaft
Shaft Type D-Cut
Shaft Diameter(mm) 8
Shaft Length(mm) 21
No. of Lead 4
Lead Length(mm) 500
Weight(g) 1750

Write a review

Note: HTML is not translated!
Captcha

Do you have any questions about Dual Shaft Nema 23 Bipolar 3Nm (425oz.in) 4.2A 57x57x114mm 4 Wires?

Captcha