Dual Shaft Nema 17 Bipolar 0.9deg 44Ncm (62.48oz.in) 1.68A 2.8V 42x42x48mm 4 Wires

     0 reviews  |  Write a review
SKU: 17HM19-1684D
$14.60

Bulk quantity price break:

Qty 5 10 50 100
Price $13.52 $12.98 $12.44 $11.89
Save 7% 11% 15% 19%
Availability: 100

Qty

  • Connectors: Molex, Harwin, Tyco/AMP, JST etc.
  • Lead wires & cables: Special lengths, Protective hose
  • Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
  • Winding: Resistance, Inductance, Rated Current, etc.
askquestion

This model is dual shaft Nema 17 Bipolar stepper motor,it with step angle 0.9deg and size 42x42x48mm. It has 4 wires, each phase draws 1.68A at 2.8V, with holding torque 44Ncm (62.48oz.in).

Electrical Specification

  • Manufacturer Part Number: 17HM19-1684D
  • Motor Type: Bipolar Stepper
  • Step Angle: 0.9 deg
  • Holding Torque: 44Ncm(62.48oz.in)
  • Rated Current/phase: 1.68A
  • Voltage: 2.8V
  • Phase Resistance: 1.65ohms
  • Inductance: 4.10mH ± 20%(1KHz)

Physical Specification

  • Frame Size: 42x 42mm
  • Body Length: 48mm
  • Shaft Diameter: Φ5mm
  • Front Shaft Length: 24mm
  • Rear Shaft Length:13mm
  • D-cut Length: 15mm
  • Number of Leads: 4
  • Lead Length: 500mm
  • Weight: 350g

Connection

A+
A-
B+
B-
Black
Green
Red
Blue

Resources

Electrical Specification
Bipolar/Unipolar Bipolar
Holding Torque(Ncm) 44
Holding Torque(oz.in) 62.3
Inductance(mH) 4.1
Phase Resistance(ohm) 1.65
Rated Current(A) 1.68
Step Angle(°) 0.9
Physical Specification
Body Length(mm) 48
Frame Size(mm) 42x42
Single Shaft/Dual Shaft Dual Shaft
Shaft Type D-Cut
Shaft Diameter(mm) 5
Shaft Length(mm) 24
No. of Lead 4
Lead Length(mm) 500
Weight(g) 350

Write a review

Note: HTML is not translated!
Captcha

Do you have any questions about Dual Shaft Nema 17 Bipolar 0.9deg 44Ncm (62.48oz.in) 1.68A 2.8V 42x42x48mm 4 Wires?

Captcha