Digital Stepper Driver 2.1-11.7A 176-253VAC for 3-Phase Nema 34, 42, 52 Stepper Motor
$148.83
5 + $139.81
10 + $131.82
50 + $124.69
100 + $118.30
- In Stock: 10000
- Model: 3DM2283T
- Gross Weight: 1.79kg
- Certificated: ISO, CE, UKCA
Available Options
Ships within 24 hours for items in stock!
The 3DM2283T is a fully digital stepper drive developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter auto-configuration feature offers quick setup to optimal modes with different motors. Compared with traditional analog drives, 3DM2283T can drive a stepper motor at much lower noise, lower heating, and smoother movement. Its unique features make 3DM2283T an ideal choice for high requirement applications.
Key Features:
- Anti-Resonance provides optimal torque and nulls mid-range instability
- Motor auto-identification and parameter auto-configuration technology, offers optimal responses with different motors
- Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movement
- Supply voltage up to 240VAC
- Output current programmable, from 2.1A to 11.7A. It can also be set via DIP switches
- Pulse input frequency up to 200KHz, TTL compatible and optically isolated input
- Automatic idle-current reduction
- Suitable for 3-phase motors
- Support PUL/DIR and CW/CCW modes
- Over-voltage, Under-voltage, over-current, phase-error protections
Electrical Specifications:
- Output Peak Current: 2.1 - 11.7A
- Input Voltage: 176 - 253VAC
- Logic Signal Current: 7 - 16mA(Typical 10mA)
- Pulse Input Frequency: 0 - 200kHz
- Isolation Resistance: 500MΩ
Operating Environment and other Specifications(Tj = 25℃/77℉):
- Cooling: Natural Cooling or Forced cooling
- Environment: Avoid dust, oil fog and corrosive gases
- Ambient Temperature: 0 - 50℃
- Humidity: 40% - 90% RH
- Operating Temperature: 70℃ MAX
- Vibration: 10-55Hz/0.15mm
- Storage Temperature: -20 - 65℃
- Weight: Approx.1300g(45.86oz)
Electrical Specification | |
Alarm Output | Yes |
Brake Output | No |
Control Modes | Pulse Mode |
Encoder Feedback | No |
Input Voltage Reference(V) | 180 - 240AC |
Integrated with Pulser | No |
Max. Output Current RMS(A) | 8.3 |
No. of Phase | 3 |
Product Type | Stepper Motor Driver & Controller |
Input Voltage(V) | 176 - 253AC |
Output Current(A) | 2.1 - 11.7 |
Microstep(Steps/rev.) | 200 - 10000 |
Max. Pulse Input(kHZ) | 200 |
Pulse Width(μs) | 2.5 |
Physical Specification | |
Inventory Method | Dedicated Inventory |
Product Series | T Series |