3 Axis 3.0Nm(425oz.in) Nema 23 Stepper Motor & Driver & Power Supply-Update

• 3 x Digital Stepper Drive 1.0-4.2A 20-50VDC for Nema 17, 23, 24 Stepper Motor
• 3 x 3Nm (425oz.in) of Nema 23 Stepper Motor
• 1 x 350W 36V 9.7A 115/230V Switching Power Supply

Driver Specification

• Input voltage 20-50VDC
• Anti-Resonance provides optimal torque and nulls mid-range instability
• Motor auto-identification and parameter auto-configuration when power on, offer optimal responses with different motors
• Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movement
• 15 selectable microstep resolutions including 400, 800, 1600, 3200, 6400, 12800, 25600, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 25000
• Soft-start with no “jump” when powered on
• 8 selectable peak current including 1.00A, 1.46A, 1.91A, 2.37A, 2.84A, 3.31A, 3.76A, 4.20A
• Pulse input frequency up to 200 KHz, TTL compatible and optically isolated input
• Automatic idle-current reduction
• Suitable for 2-phase and 4-phase motors
• Support PUL/DIR mode
• Over-voltage and over-current protections

Motor Specification

• Manufacturer Part Number: 23HS45-3504S
• Motor Type: Bipolar Stepper
• Step Angle: 1.8 deg
• Holding Torque: 3Nm(425oz.in)
• Rated Current/phase: 3.5A
• Voltage: 4.2V
• Phase Resistance: 1.2ohms
• Inductance: 5mH ± 20%(1KHz)
• Frame Size: 57 x 57mm
• Body Length: 113mm
• Shaft Diameter: Φ10mm
• Shaft Length: 24mm
• D-cut Length: 20mm
• Number of Leads: 4
• Lead Length: 400mm
• Weight: 1.6kg

Connection

Power Specification

• 36V DC 9.8A output
• AC input voltage range: 93~132V/176~264VAC
• 115V/230V AC selected by switch
• High efficiency low cost
• Forced air cooling by built-in DC fan
• Low output ripple and yawp
• Over current, over voltage, short circuit and overheat protections
• 215*115*50mm (L*W*H)

Resources

• Motor Datasheet: 23HS45-3504S.pdf
• Motor Torque Curve: 23HS45-3504S_Torque_Curve.pdf
• Driver Manual: DM542T.pdf
• Power Supply Manual: S-350-36.pdf