3 Axis CNC Router Kit 3.0Nm(425oz.in) Nema 23 Stepper Motor & Driver 3-DM542T-23HS45

CNC Kit - 3 Axis CNC Router Kit 3.0Nm(425oz.in) Nema 23 Stepper Motor & Driver

$186.94

(10000)

CNC Kit - 3 Axis CNC Router Kit 3.0Nm(425oz.in) Nema 23 Stepper Motor & Driver

     0 reviews  |  Write a review
SKU: 3-DM542T-23HS45
$186.94

Bulk quantity price break:

Qty 3 10 30 100
Price $176.56 $166.17 $155.78 $145.40
Save 6% 11% 17% 22%
Availability: 10000
askquestion
This CNC kit included:
  • 3 x Digital Stepper Drive 1.0-4.2A 20-50VDC for Nema 17, 23, 24 Stepper Motor
  • 3 x 3Nm (425oz.in) of Nema 23 Stepper Motor
  • 1 x 400W 36V 11A 115/230V Switching Power Supply

Driver Specification

  • Input voltage 20-50VDC
  • Anti-Resonance provides optimal torque and nulls mid-range instability
  • Motor auto-identification and parameter auto-configuration when power on, offer optimal responses with different motors
  • Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movement
  • 15 selectable microstep resolutions including 400, 800, 1600, 3200, 6400, 12800, 25600, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 25000
  • Soft-start with no “jump” when powered on
  • 8 selectable peak current including 1.00A, 1.46A, 1.91A, 2.37A, 2.84A, 3.31A, 3.76A, 4.20A
  • Pulse input frequency up to 200 KHz, TTL compatible and optically isolated input
  • Automatic idle-current reduction
  • Suitable for 2-phase and 4-phase motors
  • Support PUL/DIR mode
  • Over-voltage and over-current protections

Motor Specification

  • Manufacturer Part Number: 23HS45-3504S
  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8 deg
  • Holding Torque: 3Nm(425oz.in)
  • Rated Current/phase: 3.5A
  • Voltage: 4.2V
  • Phase Resistance: 1.2ohms
  • Inductance: 5mH ± 20%(1KHz)
  • Frame Size: 57 x 57mm
  • Body Length: 113mm
  • Shaft Diameter: Φ10mm
  • Shaft Length: 24mm
  • D-cut Length: 20mm
  • Number of Leads: 4
  • Lead Length: 400mm
  • Weight: 1.6kg

Connection

A+
A-
B+
B-
Black
Green
Red
Blue

Power Specification

  • 36V DC 11A output
  • AC input voltage range: 93~132V/176~264VAC
  • 115V/230V AC selected by switch
  • High efficiency low cost
  • Forced air cooling by built-in DC fan
  • Low output ripple and yawp
  • Over current, over voltage, short circuit and overheat protections
  • 215*115*50mm (L*W*H)

Resources

Motor Specification
Bipolar/Unipolar Bipolar
Step Angle(°) 1.8
Holding Torque (Ncm) 300
Holding Torque (oz.in) 425
Rated Current (A) 3.5
Phase Resistance(ohm) 1.2
Inductance(mH) 4
Motor Frame Size(mm) 57x57
Body Length(mm) 113
Signal Shaft/Dual Shaft Single Shaft
Shaft Type D-Cut
Shaft Diameter(mm) 10
Shaft Length(mm) 24
Lead Length(mm) 400
Stepper Driver Specification
Frame Size(mm) 118x75.5x25.5
Driving Voltage(V) 20 - 50
Output Current(A) 1 - 4.2
Microstep(Steps/rev.) 400-25600, 1000-25000
Max. Pulse Input(kHZ) 200
Pulse Width(μs) 2.5
Power Supply Specification
Output Voltage(V) 36
Power(W) 400
Max. Output Current(A) 11
Input Voltage(V) 115/230
Physical Specification
Weight(g) 7500

Write a review

Note: HTML is not translated!

Do you have any questions about CNC Kit - 3 Axis CNC Router Kit 3.0Nm(425oz.in) Nema 23 Stepper Motor & Driver?