- Your shopping cart is empty!
WELCOME TO STEPPERONLINE
1 Axis Stepper Kit 8.5Ncm(1204oz.in) Nema 34 Stepper Motor & Driver
1 Axis Stepper Kit 8.5Ncm(1204oz.in) Nema 34 Stepper Motor & Driver
SKU: 1-MA860H-34HS46
$99.86
Bulk quantity price break:
| Qty | 5 | 10 | 50 | 100 |
|---|---|---|---|---|
| Price | $96.74 | $93.62 | $90.50 | $87.37 |
| Save | 3% | 6% | 9% | 13% |
Availability: 102
askquestion
This CNC kit included:
- 1 x Stepper Motor Driver 2.6-7.2A Max 80VAC or 110VDC MA860H
- 1 x Dual Shaft Nema 34 CNC Stepper Motor 8.5Nm (1204oz.in) 5A 86x114mm
Motor Specification
- Manufacturer Part Number: 34HS46-5004D
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 8.5Nm(1204oz.in)
- Rated Current/phase: 5A
- Voltage: 5V
- Phase Resistance: 1ohms
- Inductance: 11mH ± 20%(1KHz)
- Frame Size: 86 x 86mm
- Body Length: 114mm
- Shaft Diameter: Φ14mm
- Shaft Length: 37mm
- D-cut Length: 25mm
- Number of Leads: 4
- Lead Length: 300mm
- Weight: 3.6kg
Connection
A+ |
A- |
B+ |
B- |
Red |
Green |
Yellow |
Blue |
Driver Specification
- High performance, cost-effective
- Supply voltage up to 80VAC or +110VDC
- Output current up to 7.2A
- Self-adjustment technology
- Pure-sinusoidal current control technology
- Pulse input frequency up to 300 KHz
- TTL compatible and optically isolated input
- Automatic idle-current reduction
- 16 selectable resolutions in decimal and binary, up to 51,200 steps/rev
- Suitable for 2-phase and 4-phase motors
- Short-voltage, over-voltage, over-current and short-cicuit protection
Resources
- Motor Datasheet: 34HS46-5004D.pdf
- Motor Torque Curve: 34HS46-5004D_Torque_Curve.pdf
- Driver Manual: MA860H.pdf
| CNC Kit Specification | |
| Kit type | Single Axis |
| Open-loop/Closed-loop | Open-loop |
| Motor Specification | |
| Body Length(mm) | 114 |
| Holding Torque(Ncm) | 850 |
| Holding Torque(oz.in) | 1203.7 |
| Inductance(mH) | 11 |
| Lead Length(mm) | 300 |
| Motor Nema Size | Nema 34 |
| No. of Lead | 4 |
| Phase Resistance(ohm) | 1 |
| Rated Current(A) | 5 |
| Shaft Diameter(mm) | 14 |
| Shaft Length(mm) | 37 |
| Step Angle(°) | 1.8 |
| Stepper Driver Specification | |
| Input Voltage(V) | 24 - 110VDC / 18 - 80VAC |
| Output Current(A) | 2.6 - 7.2 |
| Microstep(Steps/rev.) | 400 - 51200 |
| Max. Pulse Input(kHZ) | 300 |
| Pulse Width(μs) | 1.5 |
| Physical Specification | |
| Weight(g) | 4900 |
