1 Axis Stepper Kit 4.0Nm(566oz.in) Nema 24 Stepper Motor & Driver

     1 reviews  |  Write a review
SKU: 1-M542T-24HS39
$48.99 $51.26

Bulk quantity price break:

Qty 3 10 30 100
Price $49.66 $48.06 $46.46 $44.86
Save 3% 6% 9% 13%
Availability: 90

Qty

askquestion
This CNC kit included:
  • 1 x Nema 24 Stepper Motor Drive 24-50VDC 1.5A-4.5A 256 Microstep M542T
  • 1 x Dual Shaft Nema 24 Bipolar 4Nm (566 oz.in) 60x60x100mm 8 Wires

Motor Specification

  • Manufacturer Part Number: 24HS39-3008D
  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8 deg
  • Holding Torque(Bipolar): 4Nm(566oz.in)
  • Holding Torque(Unipolar): 2.8Nm(397oz.in)
  • Rated Current/phase(Bipolar Parallel): 4.24A
  • Rated Current/phase(Bipolar Serial): 2.12A
  • Rated Current/phase(Unipolar): 3A
  • Phase Resistance(Bipolar Parallel): 0.7ohms
  • Phase Resistance(Bipolar Serial): 2.8ohms
  • Phase Resistance(Unipolar): 1.4ohms
  • Inductance(Bipolar Parallel): 3mH ± 20%(1KHz)
  • Inductance(Bipolar Serial): 12mH ± 20%(1KHz)
  • Inductance(Unipolar): 3mH ± 20%(1KHz)
  • Frame Size: 60 x 60mm
  • Body Length: 100mm
  • Shaft Diameter: Φ8mm
  • Shaft Length: 24mm
  • D-cut Length: 20mm
  • Number of Leads: 8
  • Lead Length: 400mm
  • Weight: 1.6kg

Connection

A+
A-
B+
B-
Black
Green
Red
Blue

Driver Specification

  • High performance, cost-effective
  • Input Voltage: +24~50VDC (Typical 36VDC)
  • Output Peak Current: 1.5~4.5A
  • Self-adjustment technology
  • Pure-sinusoidal current control technology
  • Pulse input frequency up to 300 KHz
  • TTL compatible and optically isolated input
  • Automatic idle-current reduction
  • 16 selectable resolutions in decimal and binary, up to 51,200 steps/rev
  • Suitable for 2-phase and 4-phase motors
  • Short-voltage, over-voltage, over-current protections

Resources

Motor Specification
Body Length(mm) 100
Holding Torque(Ncm) 400
Holding Torque(oz.in) 566.4
Inductance(mH) 3
Lead Length(mm) 400
Motor Nema Size Nema 24
No. of Lead 8
Phase Resistance(ohm) 0.7
Rated Current(A) 4.24
Shaft Diameter(mm) 8
Shaft Length(mm) 24
Step Angle(°) 1.8
Stepper Driver Specification
Input Voltage(V) 24 - 50
Output Current(A) 1.5 - 4.5
Microstep(Steps/rev.) 400 - 51200
Max. Pulse Input(kHZ) 300
Pulse Width(μs) 2.5
Physical Specification
Weight(g) 2150

Write a review

Note: HTML is not translated!
Captcha

Do you have any questions about 1 Axis Stepper Kit 4.0Nm(566oz.in) Nema 24 Stepper Motor & Driver?

Captcha