1 Axis Closed loop Stepper Kit 8.25 Nm(1168.53 oz.in) Nema 34 Closed loop Stepper Motor & Driver

     0 reviews  |  Write a review
SKU: 1-CL86T-34HS46
$127.63 $147.00

Bulk quantity price break:

Qty 5 10 50 100
Price $122.79 $117.95 $113.10 $108.26
Save 16% 20% 23% 26%
Availability: 100

Qty

askquestion
This CNC kit included:
  • 1 x Closed Loop Stepper Driver 0~8.2A 24~80VDC for Nema 34 Stepper Motor
  • 1 x Nema 34 Closed Loop Stepper Motor 8.25Nm/1168.53oz.in Encoder 1000CPR
  • 1 x 1.7 m(67") Long Encoder Extension Cable for Closed Loop Stepper Driver
  • 1 x RV-4 AWG18 1.7 m(67") Long Motor Extension Cable with GX16 Aviation Plug for Nema 34 Closed Loop Stepper Motors(Just for aviation-plug model motor)

Motor Specification

  • Manufacturer Part Number: 34HS46-6004D-E1000
  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8 deg
  • Frame Size: 86 x 86 mm
  • Holding Torque: 8.25 N.m(1168.53 oz.in)
  • Rated Current/phase: 6 A
  • Shaft Diameter: Φ14 mm
  • Shaft Length: 40 mm
  • Key-Way Length: 25 mm
  • Phase Resistance: 0.4 ohm
  • Inductance: 4.2 mH ± 20%(1KHz)
  • Number of Leads: 4
  • Lead Length: 300 mm
  • Driving Voltage : 5V
  • Output current : 55mA
  • Resolution : 1000ppr
  • Output Signal : 2 Channels
  • Bore Diameter : Φ8mm
  • Output Frequency : ≤1MHz
  • Running Speed : ≤5000rpm
  • IP Protection : IP20

Connection

A+
A-
B+
B-
White
Green
Blue
Black

Driver Specification

  • Closed-loop, eliminates loss of synchronization
  • Broader operating range – higher torque and higher speed
  • Reduced motor heating and more efficient
  • Smooth motion and super-low motor noise
  • Do not need a high torque margin
  • No Tuning and always stable
  • Quick response, no delay and almost no settle time
  • High torque at starting and low speed, high stiffness at standstill
  • Offer servo-like performance at a much lower cost

Resources

CNC Kit Specification
Kit type Single Axis
Open-loop/Closed-loop Closed-loop
Motor Specification
Holding Torque(Ncm) 825
Holding Torque(oz.in) 1168.53
Inductance(mH) 4.2
Lead Length(mm) 300
Motor Nema Size Nema 34
No. of Lead 4
Phase Resistance(ohm) 0.4
Rated Current(A) 6
Shaft Diameter(mm) 14
Shaft Length(mm) 40
Step Angle(°) 1.8
Encoder Specification
Output Current(mA) 55
Resolution(CPR) 1000
Output Signal Channels 2 Channels
Output Frequency ≤1
Running Speed(rpm) ≤5000
IP Protection IP20

Write a review

Note: HTML is not translated!
Captcha

Do you have any questions about 1 Axis Closed loop Stepper Kit 8.25 Nm(1168.53 oz.in) Nema 34 Closed loop Stepper Motor & Driver?

Captcha