Leadshine ES-DH2306 Easy Servo Drive 220/230 AC Input 0.5~6.0A Output Current ES-DH2306

Leadshine ES-DH2306 Easy Servo Drive 220/230 AC Input 0.5~6.0A Output Current

$237.90

(9997)

Leadshine ES-DH2306 Easy Servo Drive 220/230 AC Input 0.5~6.0A Output Current

     3 reviews  |  Write a review
SKU: ES-DH2306
$237.90

Bulk quantity price break:

Qty 3 10 30 100
Price $226.00 $214.11 $202.21 $190.32
Save 5% 10% 15% 20%
Availability: 9997
askquestion

This driver is brand Leadshine (The most famous stepper driver company in China), and STEPPERONLINE is the biggest distributor of Leadshine in China.

This is one of Leadshine’s ES-DH series easy servo drives. It is based on the latest DSP technology and advanced control algorithm of combining brushless servo and stepper systems. Taking direct 150-230VAC input makes it able to drive large Nema 34 and Nema 42 closed-loop motors and offer huge torque to applications with motion control systems. It can drive the motors to move with less noise and heat, and it gives quick response with no torque reservation, high standstill stiffness, no hunting, no overshooting for almost zero setting time, and no tuning for almost all applications.

Key Features:

  • Hybrid servo control technology to combine advantage of open-loop stepper systems and brushless servo systems.
  • Closed-loop controls to eliminate lose of steps, stall or movement synchronization
  • High starting torque and quick response
  • Smooth motor movement with no vibration
  • Excellent respond time, quick acceleration, and very high high-speed torque(30% over open-loop)
  • Load-dependent dynamic current current output from drive to motor to significantly motor heating deduction
  • Input voltage from 150-230VAC, MAX 6A peak current output from drive to motor
  • Microstep resolution value from 200-51200(increased by 1) via software configuration
  • Isolated control inputs of pulse, direction and enable
  • No tuning for plug and play setup
  • On-board HMI for easy setup and configuration
  • In-position and fault outputs to external motion controllers for complete system controls
  • Over voltage, over -current, and position-error protection

Electrical Specifications:

  • Output Peak Current: 0.5~6A
  • Input Voltage: 150~230VAC
  • Logic Signal Current: 7~20mA (Typical 10mA)
  • Pulse Input Frequency: 0~200 / 0~500kHz
  • Isolation Resistance: 500MΩ

Operating Environment and other Specifications(Tj = 25℃/77℉):

  • Cooling: Natural Cooling or Forced cooling
  • Environment: Avoid dust, oil fog and corrosive gases
  • Ambient Temperature: 0℃ - 40℃
  • Humidity: 40%RH-90%RH
  • Operating Temperature: 70℃ MAX
  • Vibration:5.9m/s2 Max
  • Storage Temperature: -20℃ - 80℃
  • Weight: Approx.1500g (52.9oz)

Resources

Stepper Driver Specification
Frame Size(mm) 180X140X70
Driving Voltage(V) 150 - 230
Output Current(A) 0.5 - 6
Microstep(Steps/rev.) 200 - 51200
Max. Pulse Input(kHZ) 200 / 500
Pulse Width(μs) 2.5
Physical Specification
Weight(g) 1500

Write a review

Note: HTML is not translated!

Do you have any questions about Leadshine ES-DH2306 Easy Servo Drive 220/230 AC Input 0.5~6.0A Output Current?

Get 3% OFF on your purchase,
Just need Share or Tweet us!