- Your shopping cart is empty!
Leadshine ES-DH1208 Easy Servo Drive 110/120 AC Input 0.5~8.0A Output Current
This driver is brand Leadshine (The most famous stepper driver company in China), and STEPPERONLINE is the biggest distributor of Leadshine in China.
By taking direct 110 / 120 or 220 / 230VAC input, Leadshine ES-DH series high voltage easy servo drives can power large Nema 34 and 42 easy servo motors and offer huge torque to applications with motion control systems.
Leadshine ES-DH serirs easy servo drives are based on the latest DSP technology and advanced control algorithm of combining brushless servo and stepper systems. They are featured with closed position loop, offering huge torque, excellent acceleration & quick response, no torque reservation, high standstill stiffness, extra low noise & heating, smooth motor movement, no hunting, no overshooting for almost zero setting time, and no tuning for almost all applications.
- Hybrid servo control technology to combine advantage of open-loop stepper systems and brushless servo systems.
- Closed-loop controls to eliminate lose of steps, stall or movement synchronization
- High starting torque and quick response
- Smooth motor movement with no vibration
- Excellent respond time, quick acceleration, and very high high-speed torque(30% over open-loop)
- Load-dependent dynamic current current output from drive to motor to significantly motor heating deduction
- Input voltage from 70-130VAC, MAX 8A peak current output from drive to motor
- Microstep resolution value from 200-51200(increased by 1) via software configuration
- Isolated control inputs of pulse, direction and enable
- No tuning for plug and play setup
- On-board HMI for easy setup and configuration
- In-position and fault outputs to external motion controllers for complete system controls
- Over voltage, over -current, and position-error protection
- Servo control for stepper motors with encoders up to Nema 42
- Output Peak Current: 0.5~8A
- Input Voltage: 30~130VAC
- Logic Signal Current: 7~20mA (Typical 10mA)
- Pulse Input Frequency: 0~200 / 0~500kHz
- Isolation Resistance: 500MΩ
Operating Environment and other Specifications(Tj = 25℃/77℉):
- Cooling: Natural Cooling or Forced cooling
- Environment: Avoid dust, oil fog and corrosive gases
- Ambient Temperature: 0℃ － 40℃
- Humidity: 40%RH－90%RH
- Operating Temperature: 70℃ MAX
- Vibration: 5.9m/s2 Max
- Storage Temperature: -20℃ － 80℃
- Weight: Approx.1500g (52.9oz)
- Leadshine Manual: ES-DH1208.pdf
|Stepper Driver Specification|
|Driving Voltage(V)||70 - 130VAC|
|Output Current(A)||0.5 - 8|
|Microstep(Steps/rev.)||200 - 51200|
|Max. Pulse Input(kHZ)||200 / 500|