- Your shopping cart is empty!
WELCOME TO STEPPERONLINE
Arduino
-15%
Nema 17 Bipolar 1.8deg 26Ncm (36.8oz.in) 0.4A 12V 42x42x34mm 4 Wires
SKU: 17HS13-0404S1
-13%
Nema 17 Bipolar 45Ncm (63.74oz.in) 1.5A 42x42x39mm 4 Wires w/ 1m Pin Connector
SKU: 17HS15-1504S-X1
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x39mm. It has 4 wires, each phase draws current 1.5A, with holding torque 45Ncm (63.74oz.in).
Electrical Specification
Manufacturer Part Number: 1..
Full D-cut Shaft Nema 17 Bipolar 59Ncm (84oz.in) 2A 42x48mm 4 Wires w/ 1m Cable & Connector
SKU: 17HS19-2004S2
$10.86
As low as : $9.12
-18%
Nema 17 Bipolar 59Ncm (84oz.in) 2A 42x48mm 4 Wires w/ 1m Cable & Connector
SKU: 17HS19-2004S1
-23%
Digital Stepper Driver Low Speed Arduino Low Control Signal Voltage 3.3V-5V Current 1.4-5.6A 15-36VAC/20-50VDC for Nema 17, 23, 24 Stepper Motor
SKU: DM556N-L
-13%
Nema 17 Bipolar 1.8deg 65Ncm (92oz.in) 2.1A 3.36V 42x42x60mm 4 Wires
SKU: 17HS24-2104S
Nema 23 Bipolar 1.8deg 1.9Nm (269oz.in) 3A 3.36V 57x57x76mm 4 Wires
SKU: 23HS30-3004S
$22.64
As low as : $17.72
Show:
Showing 1 to 8 of 8 (1 Pages)
-
Frame Size(mm)
-
Microstep(Steps/rev.)
-
Body Length(mm)
-
Shaft Diameter(mm)
-
No. of Lead
-
Input Voltage(V)
-
Single Shaft/Dual Shaft
-
Shaft Type
-
Bipolar/Unipolar
-
Inductance(mH)
-
Holding Torque(oz.in)
-
Lead Length(mm)
-
Step Angle(°)
-
Output Current(A)
-
Phase Resistance(ohm)
-
Weight(g)
-
Holding Torque(Ncm)
-
Max. Pulse Input(kHZ)
-
Shaft Length(mm)
-
Pulse Width(μs)
-
Rated Current(A)