- Your shopping cart is empty!
WELCOME TO STEPPERONLINE
Nema 11 Stepper L=51mm w/ Rear Shaft & Screw Hole & Gear Ratio 5:1 Gearbox
Nema 11 Stepper L=51mm w/ Rear Shaft & Screw Hole & Gear Ratio 5:1 Gearbox
SKU: 11HS20-0674D-PG5
$33.58
Bulk quantity price break:
| Qty | 5 | 10 | 50 | 100 |
|---|---|---|---|---|
| Price | $32.78 | $31.98 | $31.18 | $30.38 |
| Save | 2% | 5% | 7% | 10% |
Availability: 100
askquestion
This Nema 11 stepper motor with 51mm body and 0.67A rated current, integrated a planetary gearbox of 5.18:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque. A 5mm diameter rear shaft is available.
Electrical Specification
- Manufacturer Part Number: 11HS20-0674D-PG5
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 12Ncm(17.04oz.in)
- Rated Current/phase: 0.67A
- Voltage: 8.04V
- Phase Resistance: 12ohms
- Inductance: 6.5mH ± 20%(1KHz)
Gearbox Specifications
- Gearbox Type:Planetary
- Gear Ratio:5.18:1
- Efficiency:90%
- Backlash at No-load:<=1deg
- Max.Permissible Torque:2N.m(283oz.in)
- Moment Permissible Torque:4N.m(566oz.in)
- Shaft Maximum Axial Load:5N
- Shaft Maximum Radial Load:25N
Physical Specification
- Frame Size: 28 x 28mm
- Motor Length: 51mm
- Gearbox Length:27mm
- Front Shaft Diameter: Φ6mm
- Front Shaft Length: 18mm
- Front D-cut Length: 12mm
- Rear Shaft Diameter: Φ4mm
- Rear Shaft Length:12mm
- Number of Leads: 4
- Lead Length: 500mm
- Weight: 400g
Connection
A+ |
A- |
B+ |
B- |
Black |
Green |
Red |
Blue |
Resources
- Full Datasheet: 11HS20-0674D-PG5.pdf
| Gearbox Specification | |
| Backlash at No-load(Max.°) | 1 |
| Efficiency | 90% |
| Gear Ratio | 5.18:1 |
| Gearbox Length(mm) | 27.2 |
| Gearbox Type | Planetary |
| Max. Permissible Torque(Ncm) | 200 |
| Max. Permissible Torque(oz.in) | 283.28 |
| Moment Permissible Torque(Ncm) | 400 |
| Moment Permissible Torque(oz.in) | 566.56 |
| Shaft Maximum Axial Load(N) | 5 |
| Shaft Maximum Radial Load(N) | 25 |
| Motor Specification | |
| Inductance(mH) | 6.5 |
| Lead Length(mm) | 500 |
| Motor Nema Size | Nema 11 |
| No. of Lead | 4 |
| Phase Resistance(ohm) | 12 |
| Rated Current(A) | 0.67 |
| Shaft Diameter(mm) | 6 |
| Shaft Length(mm) | 18 |
| Bipolar/Unipolar | Bipolar |
| Holding Torque w/o Gearbox(Ncm) | 12 |
| Holding Torque w/o Gearbox(oz.in) | 17.00 |
| Single Shaft/Dual Shaft | Dual Shaft |
| Shaft Type | D-Cut |
| Physical Specification | |
| Weight(g) | 400 |
