- Your shopping cart is empty!
WELCOME TO STEPPERONLINE
Dual Shaft Nema 17 Bipolar 59Ncm (83.78oz.in) 2A 2.8v 42x42x48mm 4 Wires -600x600.jpg)
-70x70.jpg)
-70x70.jpg)
-70x70.jpg)
-70x70.jpg)
-70x70.jpg)
-70x70.jpg)
-1000x1000.jpg)
-1000x1000.jpg)
-1000x1000.jpg)
-1000x1000.jpg)
-1000x1000.jpg)
-1000x1000.jpg)
Dual Shaft Nema 17 Bipolar 59Ncm (83.78oz.in) 2A 2.8v 42x42x48mm 4 Wires
SKU: 17HS19-2004D
$11.62
Bulk quantity price break:
| Qty | 5 | 10 | 50 | 100 |
|---|---|---|---|---|
| Price | $10.63 | $10.13 | $9.64 | $9.15 |
| Save | 9% | 13% | 17% | 21% |
Availability: 100
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
askquestion
This model is dual shaft Nema 17 Bipolar stepper motor,it with step angle 1.8deg and size 42x42x48mm. It has 4 wires, each phase draws 2A at 2.8V, with holding torque 59Ncm (83.78oz.in).
Electrical Specification
- Manufacturer Part Number: 17HS19-2004D
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 59Ncm(83.78oz.in)
- Rated Current/phase: 2.00A
- Voltage: 2.80V
- Phase Resistance: 1.40ohms
- Inductance: 3.00mH ± 20%(1KHz)
Physical Specification
- Frame Size:42x42mm
- Body Length: 48mm
- Shaft Diameter: Φ5mm
- Front Shaft Length: 25mm
- Rear Shaft Length: 13mm
- Number of Leads: 4
- Lead Length: 500mm
- Weight: 400g
Connection
A+ | A- | B+ | B- |
Black | Green | Red | Blue |
Resources
- Full Datasheet: 17HS19-2004D.pdf
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Holding Torque(Ncm) | 59 |
| Holding Torque(oz.in) | 83.57 |
| Inductance(mH) | 3.00 |
| Phase Resistance(ohm) | 1.40 |
| Rated Current(A) | 2.00 |
| Step Angle(°) | 1.8 |
| Physical Specification | |
| Body Length(mm) | 48 |
| Frame Size(mm) | 42 x 42 |
| Single Shaft/Dual Shaft | Dual Shaft |
| Shaft Type | O |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 25 |
| No. of Lead | 4 |
| Weight(g) | 400 |
