- Your shopping cart is empty!
WELCOME TO STEPPERONLINE
Dual Shaft Nema 14 1.8deg 18Ncm (25.56oz.in) 0.8A 5.4V 35.2x35.2x34mm 4 Wires
Dual Shaft Nema 14 1.8deg 18Ncm (25.56oz.in) 0.8A 5.4V 35.2x35.2x34mm 4 Wires
SKU: 14HS13-0804D
$10.35
Bulk quantity price break:
| Qty | 5 | 10 | 50 | 100 |
|---|---|---|---|---|
| Price | $9.52 | $9.11 | $8.69 | $8.28 |
| Save | 8% | 12% | 16% | 20% |
Availability: 100
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
askquestion
This model is dual shaft Nema 14 Bipolar stepper motor,it with step angle 1.8deg and size 35.2x35.2x34mm. It has 4 wires, each phase draws 0.8A at 5.4V, with holding torque 18Ncm (25.56oz.in).
Electrical Specification
- Manufacturer Part Number: 14HS13-0804D
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 18Ncm(25.56oz.in)
- Rated Current/phase: 0.8A
- Voltage: 5.4V
- Phase Resistance: 6.80ohms
- Inductance: 10.00mH ± 20%(1KHz)
Physical Specification
- Frame Size: 35.2 x 35.2mm
- Body Length: 34mm
- Shaft Diameter: Φ5mm
- Front Shaft Length: 24mm
- Rear Shaft Length:12mm
- D-cut Length: 16.5mm
- Number of Leads: 4
- Lead Length: 500mm
- Weight: 170g
Connection
A+ |
A- |
B+ |
B- |
Black |
Green |
Red |
Blue |
Resources
- Full Datasheet: 14HS13-0804D.pdf
- Torque Curve: 14HS13-0804D Torque Curve.pdf
| Electrical Specification | |
| Holding Torque(Ncm) | 18 |
| Holding Torque(oz.in) | 25.50 |
| Inductance(mH) | 10.00 |
| Phase Resistance(ohm) | 6.8 |
| Rated Current(A) | 0.8 |
| Step Angle(°) | 1.8 |
| Motor Specification | |
| Bipolar/Unipolar | Bipolar |
| Physical Specification | |
| Body Length(mm) | 34 |
| Frame Size(mm) | 35 x 35 |
| Single Shaft/Dual Shaft | Dual Shaft |
| Shaft Type | D-Cut |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 24 |
| No. of Lead | 4 |
| Lead Length(mm) | 500 |
| Weight(g) | 170 |
