- Your shopping cart is empty!
WELCOME TO STEPPERONLINE
5pcs Nema 17 Bipolar 59Ncm (84oz.in) 2A 42x48mm 4 Wires w/ 1m Cable & Connector 
-15%
5pcs Nema 17 Bipolar 59Ncm (84oz.in) 2A 42x48mm 4 Wires w/ 1m Cable & Connector
5pcs Nema 17 Bipolar 59Ncm (84oz.in) 2A 42x48mm 4 Wires w/ 1m Cable & Connector 5 3
SKU: 5-17HS19-2004S1
$39.99 $46.95
Bulk quantity price break:
| Qty | 5 | 10 | 50 | 100 |
|---|---|---|---|---|
| Price | $38.34 | $38.34 | $38.34 | $38.34 |
| Save | 18% | 18% | 18% | 18% |
Availability: 1000
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
askquestion
This is an updated version nema 17 stepper motor with holding torque of 59Ncm(83.6oz.in). Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch (2.54mm) Harwin female connector at the end of cable. It's good ideal for 3D printers, as well as CNC and robotics applications.
Package includes: 5 x 17HS19-2004S1
Electrical Specification
- Manufacturer Part Number: 17HS19-2004S1
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 59Ncm(84oz.in)
- Rated Current/phase: 2.0A
- Voltage: 2.8V
- Phase Resistance: 1.4ohms
- Inductance: 3.0mH ± 20%(1KHz)
Physical Specification
- Frame Size: 42 x 42mm
- Body Length: 47mm
- Shaft Diameter: Φ5mm
- Shaft Length: 24mm
- D-cut Length: 15mm
- Number of Leads: 4
- Lead Length: 1000mm
- Weight: 390g
Connection
A+ | A- | B+ | B- |
Black | Green | Red | Blue |
Resources
- Full Datasheet: 17HS19-2004S1.pdf
- Torque Curve: 17HS19-2004S1 Torque Curve.pdf
| Electrical Specification | |
| Inductance(mH) | 3 |
| Phase Resistance(ohm) | 1.4 |
| Rated Current(A) | 2 |
| Step Angle(°) | 1.8 |
| Bipolar/Unipolar | Bipolar |
| Holding Torque(Ncm) | 59 |
| Holding Torque(oz.in) | 84 |
| Physical Specification | |
| Body Length(mm) | 48 |
| Frame Size(mm) | Nema 17 (42 x 42) |
| Single Shaft/Dual Shaft | Single Shaft |
| Shaft Type | D-Cut |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 24 |
| No. of Lead | 4 |
| Lead Length(mm) | 1000 |
| Weight(g) | 400 |
