3 Axis TB6560 CNC Kit 0.45Nm(64oz.in) Nema 17 Stepper Motor & Driver

     0 reviews  |  Write a review
SKU: 3-TB6560-17HS19
$85.56

Bulk quantity price break:

Qty 5 10 50 100
Price $80.81 $76.05 $71.30 $66.55
Save 6% 11% 17% 22%
Availability: 100

Qty

askquestion
This CNC kit included:
  • 1 x 3 Axis TB6560 CNC Stepper Motor Driver Board
  • 3 x 0.45Nm (64oz.in) of Nema 17 Stepper Motor
  • 1 x 150W 24V 6.5A 115/230V Switching Power Supply
  • 1 x DB25 Parallel Cable & Manual CD

3 Axis TB6560 CNC Driver Board

  • Toshiba TB6560AHQ chip - High power, maximum current 3.5A
  • Resolution 1, 1/2, 1/8, 1/16 micro stepping output
  • Working voltage DC12-DC30V, rated voltage 24V
  • Adjustable current with 100%, 75%, 50%, 20% of full current by on-board switch.
  • Half current function when no signal to prevent motor heating.
  • Build with a 227V 10A Relay.
  • Manual Control circuit included.
  • Overload, over-current and over-temperature safety.
  • Protect the computer by using isolating power(1000V DC\DC) and optoelectronic coupler.
  • Supports most parallel software MACH3, KCAM4, EMC2 etc.
  • Fixed in Aluminum box, better cooling function than fan and safer protection for board circuit.

Stepper Motor

  • Manufacturer Part Number: 17HS19-1684S1
  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8 deg
  • Holding Torque: 0.45Nm (64oz.in)
  • Rated Current/phase: 1.68A
  • Voltage: 3.4V
  • Phase Resistance: 2.00ohms
  • Inductance: 2.5mH ± 20%(1KHz)
  • Frame Size: 42 x 42mm
  • Body Length: 48mm
  • Shaft Diameter: Φ5mm
  • Shaft Length: 24mm
  • Number of Leads: 4
  • Lead Length: 1000mm
  • Weight: 400g

Switching Power Supply

  • 24V DC 6.5A output
  • AC input voltage range: 92~132V/175~264VAC
  • 115V/230V AC selected by switch
  • High efficiency low cost
  • Free air cooling convection
  • Low output ripple and yawp
  • Over current, over voltage, short circuit and overheat protections
  • 199*110*50mm (L*W*H)

Resources

CNC Kit Specification
Kit type 3 Axis
Open-loop/Closed-loop Open-loop
Motor Specification
Body Length(mm) 48
Holding Torque(Ncm) 45
Holding Torque(oz.in) 63.7
Inductance(mH) 2.5
Lead Length(mm) 1000
Motor Nema Size Nema 17
No. of Lead 4
Phase Resistance(ohm) 1.65
Rated Current(A) 1.68
Shaft Diameter(mm) 5
Shaft Length(mm) 24
Step Angle(°) 1.8
Stepper Driver Specification
Input Voltage(V) 12 - 30
Output Current(A) 0.7 - 3.5
Microstep(Steps/rev.) 200 - 3200
Max. Pulse Input(kHZ) 40
Physical Specification
Weight(g) 3000

Reviews Over 3 Axis TB6560 CNC Kit 0.45Nm(64oz.in) Nema 17 Stepper Motor & Driver

Total Reviews (0)
click here write review to add review for this product.


Do you have any questions about 3 Axis TB6560 CNC Kit 0.45Nm(64oz.in) Nema 17 Stepper Motor & Driver?

Captcha