1 Axis Stepper CNC Kit 8.5Ncm(1204oz.in) Nema 34 Stepper Motor & Driver
1 Axis Stepper CNC Kit 8.5Ncm(1204oz.in) Nema 34 Stepper Motor & Driver
$115.59
5 + $112.38
10 + $109.17
50 + $105.96
100 + $102.75
- Model: 1-DM860T-34HS46
- Stock Status: 111
- SKU: 1-DM860T-34HS46
Available Options
This CNC kit included:
- 1 x Digital Stepper Drive 2.4-7.2A 18-80VAC or 36-110VDC for Nema 34 Motor
- 1 x Dual Shaft Nema 34 CNC Stepper Motor 8.5Nm (1204oz.in) 5A 86x114mm
Motor Specification
- Manufacturer Part Number: 34HS46-5004D
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 8.5Nm(1204oz.in)
- Rated Current/phase: 5A
- Voltage: 5V
- Phase Resistance: 1ohms
- Inductance: 11mH ± 20%(1KHz)
- Frame Size: 86 x 86mm
- Body Length: 114mm
- Shaft Diameter: Φ14mm
- Shaft Length: 37mm
- D-cut Length: 25mm
- Number of Leads: 4
- Lead Length: 300mm
- Weight: 3.6kg
Connection
A+ | A- | B+ | B- |
Red | Green | Yellow | Blue |
Driver Specification
- Anti-Resonance provides optimal torque and nulls mid-range instability
- Motor auto-identification and parameter auto-configuration technology, offers optimal responses with different motors
- Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movement
- 16 selectable microstep resolutions including 400, 800, 1600, 3200, 6400, 12800, 25600, 51200, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 40000
- Soft-start with no "jump" when powered on
- Input voltage 18-80VAC or 36-110VDC
- 8 selectable peak current including 2.40A, 3.08A, 3.77A, 4.45A, 5.14A, 5.83A, 6.52A, 7.20A
- Pulse input frequency up to 200 KHz, TTL compatible and optically isolated input
- Automatic idle-current reduction
- Suitable for 2-phase and 4-phase motors
- Support PUL/DIR and CW/CCW modes
- Over-voltage, over-curren protection
Resources
- Motor Datasheet: 34HS46-5004D.pdf
- Motor Torque Curve: 34HS46-5004D_Torque_Curve.pdf
- Driver Manual: DM860T.pdf
| Electrical Specification | |
| Product Series | TS Series |
| Holding Torque(Ncm) | 850 |
| Holding Torque(oz.in) | 1204 |
| Physical Specification | |
| Product Type | Open Loop Kit |
| Frame Size(mm) | Nema 34 (86 x 86) |
