1 Axis Stepper CNC Kit 4.5Nm(637oz.in) Nema 34 Stepper Motor & Driver

     0 reviews  |  Write a review
SKU: 1-DM860T-34HS31
$87.31

Bulk quantity price break:

Qty 5 10 50 100
Price $84.89 $82.46 $80.03 $77.61
Save 3% 6% 8% 11%
Availability: 103

Qty

askquestion
This CNC kit included:
  • 1 x Digital Stepper Drive 2.4-7.2A 18-80VAC or 36-110VDC for Nema 34 Motor
  • 1 x Nema 34 CNC Stepper Motor 4.5Nm (637oz.in) 5.5A 86x86x80mm Key Way Shaft

Motor Specification

  • Manufacturer Part Number: 34HS31-5504S
  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8 deg
  • Holding Torque: 4.5Nm(637oz.in)
  • Rated Current/phase: 5.5A
  • Voltage: 2.2V
  • Phase Resistance: 0.4ohms
  • Inductance: 3.5mH ± 20%(1KHz)
  • Frame Size: 86 x 86mm
  • Body Length: 80mm
  • Shaft Diameter: Φ14mm
  • Shaft Length: 35mm
  • Key-way Length: 25mm
  • Number of Leads: 4
  • Lead Length: 500mm
  • Weight: 2.3kg

Connection

A+
A-
B+
B-
Red
Green
Yellow
Blue

Driver Specification

  • Anti-Resonance provides optimal torque and nulls mid-range instability
  • Motor auto-identification and parameter auto-configuration technology, offers optimal responses with different motors
  • Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movement
  • 16 selectable microstep resolutions including 400, 800, 1600, 3200, 6400, 12800, 25600, 51200, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 40000
  • Soft-start with no "jump" when powered on
  • Input voltage 18-80VAC or 36-110VDC
  • 8 selectable peak current including 2.40A, 3.08A, 3.77A, 4.45A, 5.14A, 5.83A, 6.52A, 7.20A
  • Pulse input frequency up to 200 KHz, TTL compatible and optically isolated input
  • Automatic idle-current reduction
  • Suitable for 2-phase and 4-phase motors
  • Support PUL/DIR and CW/CCW modes
  • Over-voltage, over-curren protection

Resources

CNC Kit Specification
Kit type Single Axis
Open-loop/Closed-loop Open-loop
Motor Specification
Body Length(mm) 80
Holding Torque(Ncm) 450
Holding Torque(oz.in) 637.3
Inductance(mH) 3.5
Lead Length(mm) 500
Motor Nema Size Nema 34
No. of Lead 4
Phase Resistance(ohm) 0.4
Rated Current(A) 5.5
Shaft Diameter(mm) 14
Shaft Length(mm) 35
Step Angle(°) 1.8
Stepper Driver Specification
Input Voltage(V) 18 - 80VAC / 36 - 110VDC
Output Current(A) 2.4 - 7.2
Microstep(Steps/rev.) 400 - 51200
Max. Pulse Input(kHZ) 200
Pulse Width(μs) 2.5
Physical Specification
Weight(g) 3250

Write a review

Note: HTML is not translated!
Captcha

Do you have any questions about 1 Axis Stepper CNC Kit 4.5Nm(637oz.in) Nema 34 Stepper Motor & Driver?

Captcha