1 Axis Stepper CNC Kit 3.0Nm(425oz.in) 4.2A Nema 23 Stepper Motor & Driver DM556T

     0 reviews  |  Write a review
SKU: 1-DM556T-23HS45
$56.37

Bulk quantity price break:

Qty 5 10 50 100
Price $56.37 $54.99 $53.62 $52.24
Save 0% 2% 5% 7%
Availability: 129

Qty

askquestion
This CNC kit included:
  • 1 x Digital Stepper Drive 1.8~5.6A 20-50VDC DM556T
  • 1 x Nema 23 Bipolar 3Nm (425oz.in) 4.2A 57x57x114mm 4 Wires Stepper Motor CNC

Motor Specification

  • Manufacturer Part Number: 23HS45-4204S
  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8 deg
  • Holding Torque: 3.0Nm(425oz.in)
  • Rated Current/phase: 4.2A
  • Phase Resistance: 0.9ohms
  • Inductance: 3.8mH ± 20%(1KHz)
  • Frame Size: 57 x 57mm
  • Body Length: 113mm
  • Shaft Diameter: Φ10mm
  • Shaft Length: 24mm
  • D-cut Length: 20mm
  • Number of Leads: 4
  • Lead Length: 400mm

Connection

A+
A-
B+
B-
Black
Green
Red
Blue

Driver Specification

  • Anti-Resonance for optimal torque, extra smooth motion, low motor heating and noise
  • Motor auto-identification and parameter auto-configuration for optimal torque from wide-range motors
  • Step & direction (PUL/DIR) control
  • Multi-Stepping for smooth motor movement
  • TTL compatible and optically isolated inputs
  • Input voltage 20-50VDC
  • 16 selectable micro-step resolutions of 400-25,600 via DIP switches
  • 8 selectable output current settings of 1.8 - 5.6A via DIP switches
  • Soft-start with no "jump" when powered on
  • Pulse input frequency up to 200 KHz
  • Automatic idle-current reduction
  • Protections for over-voltage and over-current

Resources

CNC Kit Specification
No of Axis Single Axis
Open-loop/Closed-loop Open-loop
Motor Specification
Body Length(mm) 113
Holding Torque(Ncm) 300
Holding Torque(oz.in) 425
Inductance(mH) 3.8
Lead Length(mm) 400
Motor Nema Size Nema 23
No. of Lead 4
Phase Resistance(ohm) 0.9
Rated Current(A) 4.2
Shaft Diameter(mm) 10
Shaft Length(mm) 24
Step Angle(°) 1.8
Stepper Driver Specification
Input Voltage(V) 20 - 50
Output Current(A) 1.8 - 5.6
Microstep(Steps/rev.) 400 - 25600
Max. Pulse Input(kHZ) 200
Pulse Width(μs) 2.5

Write a review

Note: HTML is not translated!
Captcha

Do you have any questions about 1 Axis Stepper CNC Kit 3.0Nm(425oz.in) 4.2A Nema 23 Stepper Motor & Driver DM556T?

Captcha