1 Axis Stepper CNC Kit 12.0Nm(1699.68oz.in) Nema 34 Stepper Motor & Driver

     0 reviews  |  Write a review
SKU: 1-DM860I-34HS59
$83.46

Bulk quantity price break:

Qty 5 10 50 100
Price $80.85 $78.25 $75.64 $73.03
Save 3% 6% 9% 12%
Availability: 109

Qty

askquestion
This CNC kit included:
  • 1 x Digital Stepper Driver 2.4-7.2A 20-80VDC for Nema 34 Stepper Motor CNC Drive
  • 1 x Nema 34 Stepper Motor Bipolar 1.8deg 12.0 Nm(1699.68oz.in) 6.0A 86x86x151.5mm 4 Wires

Motor Specification

  • Manufacturer Part Number: 34HS59-6004S
  • Number of phase: 2
  • Step Angle: 1.8 deg
  • Holding Torque: 12.0 Nm(1699.68oz.in)
  • Rated Current/phase: 6.0 A
  • Phase Resistance: 0.7 ohms± 10%
  • Inductance: 7.9 mH ± 20%(1KHz)
  • Frame Size: 86 x 86 mm
  • Body Length: 151.5 mm
  • Shaft Diameter: Φ14 mm
  • Shaft Length: 37 mm
  • Keyway Shaft Length: 25 mm
  • Number of Leads: 4
  • Lead Length: 500 mm

Connection

A+
A-
B+
B-
BLK
GRN
RED
BLU

Driver Specification

  • Anti-Resonance provides optimal torque and nulls mid-range instability
  • Motor auto-identification and parameter auto-configuration technology, offers optimal responses with different motors
  • Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movement, works well as Cnc drive as well.
  • 16 selectable microstep resolutions including 400, 800, 1600, 3200, 6400, 12800, 25600, 51200, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 40000
  • Soft-start with no "jump" when powered on
  • Input voltage 20-80VDC
  • 8 selectable peak current including 2.40A, 3.08A, 3.77A, 4.45A, 5.14A, 5.83A, 6.52A, 7.20A
  • Pulse input frequency up to 200 KHz, TTL compatible and optically isolated input
  • Automatic idle-current reduction
  • Suitable for 2-phase and 4-phase motors
  • Support PUL/DIR and CW/CCW modes
  • Over-voltage, over-curren protection

Resources

Write a review

Note: HTML is not translated!
Captcha

Do you have any questions about 1 Axis Stepper CNC Kit 12.0Nm(1699.68oz.in) Nema 34 Stepper Motor & Driver?

Captcha